NEAH BAY, Washington – A unique partnership between Washington’s Makah Tribe and the Composite Recycle Technology Center (CRTC) is boosting the economic vitality of the community by manufacturing dimensional lumber that is being used to produce a specialty wood product – and homes for members of the tribe.
The small mill is owned and operated by the Makah Tribe, which also owns the surrounding timberland on its nearly 47-square-mile reservation. The mill is located in Neah Bay, which is almost at the northernmost tip of the Olympic Peninsula.
The Makah sawmill was developed by CRTC under a partnership with the tribe. The parties secured a grant of more than $2 million from the Washington Department of Commerce to establish the partnership and the mill.
Jedediah Johnson, a member of the tribe, was hired to manage the mill in 2023. Most of the equipment had already been selected and was installed or being installed.

From left, mill manager Jedediah Johnson and fellow employees Devon Halttunen, Lloyd Engram, and Robert Whiteshield Jr.
The mill began operating in January of this year and cuts mainly coastal western hemlock logs sourced from tribal lands. The tribe contracts out timber harvesting and trucking to a few logging companies.
The mill started producing dimensional lumber and received its first lumber order from CRTC. It also sells lumber to local customers, but CRTC is its primary customer. The mill has four employees, including Johnson, and produces about 8-10,000 board feet per month.
The mill is on a five-acre parcel of tribal land that includes a 3,600-square-foot SteelMaster quonset building. It is equipped with a TimberKing 2520 band sawmill with a 12-foot extension table. Other equipment includes a Cook’s Saw AE-4E edger and a Woodmaster W-4000 four-edge planer. Lumber is dried in two Nyle L200 Pro dehumidification kilns.
The TimberKing 2520 is an industrial model. It is powered by a Kubota 65 hp diesel engine. Features included solid-welded four-post head, twin beam log deck, and big beam cut core. Direction action hydraulics control log loaders, turners, stops, clamps, and toe boards. SuperSetworks provides computer-controlled cutting.
TimberKing, based in Kansas City, Missouri, says it is the oldest manufacturer of one-man sawmills in the U.S. It was founded in 1929 under the name Belsaw, with its original product being the Belsaw circular sawmill, which was in production until 1998. The company began manufacturing portable band sawmills in 1989.
(For more information, visit www.timberking.com.)
The TimberKing has performed pretty well, according to Johnson. “As far as the day-to-day stuff, it’s been working great,” he said. It runs seven to eight hours per day.
Each Nyle lumber kiln has a capacity of 2,000 board feet. It takes seven to nine days to dry the lumber to 12 percent moisture content before it is trucked to CRTC.

Lumber is dried in two Nyle L200 Pro dehumidification kilns.
The Composite Recycling Technology Center was established by the Port of Port Angeles in 2015 with the help of local, state, and federal grant funding. It is a nonprofit design and manufacturing business that intercepts uncured carbon fiber surplus destined for landfills and remanufactures it into innovative new products.
At CRTC’s plant in Port Angeles, located on the coast about 70 miles east, the lumber undergoes thermal modification in a specialty kiln from WDE Maspell, an Italian manufacturer. (North Carolina-based SII Dry Kilns is the exclusive representative for WDE Maspell in North America.) Thermal modification is a process with some similarities to drying lumber, but it is more akin to ‘baking’ the wood. The kiln chamber is heated to 400 degrees in a vacuum. It is an environmentally friendly process that eliminates the need for chemicals yet produces a highly specialized lumber product, very much like treated wood.
Thermal modification stabilizes the cellular structure of the wood, enabling it to maintain its shape, even under exposure to moisture, leading to enhanced dimensional stability and minimizing the likelihood of warping or distortion. Decreasing the wood sugars enhances the resistance to decaying organisms and termites.
The result produces lumber known for its strength, durability, and usefulness for exterior applications. Thermally modified wood can be used for siding, decking, and outdoor furniture, among others.
The CRTC is building housing units for the tribe utilizing the CRTC’s BOLEH brand of engineered homes (BOLEH stands for Built On Lot Engineered Home). The homes will incorporate the CRTC’s Advanced Cross Laminated Timber (ACLT) panel system, which uses the thermally modified lumber. The homes will be built as a complete kit at the CRTC factory in Port Angeles to be assembled on-site. The CRTC will train members of the tribe to install the homes.
The CRTC and the Makah Tribe collaborated on the design of the homes. The first units will be a two-bedroom, one-bathroom home consisting of about 900 square feet. A future four-bedroom, two-bathroom home also will be developed along with a one-bedroom home of about 400 square feet.
Most of the lumber supplied to CRTC – 90 percent, Johnson estimated – is coastal western hemlock. It is abundant in the region although it is not widely used. It is known for strength and versatility and is favored for structural applications. However, when it dries naturally, it can twist and crack, making it a poor choice as a building material. With the tribe’s Nyle dry kilns and CRTC’s Maspell thermal modification chamber, though, it can be processed into a useful wood product.

Feeding material to the Cook’s Saw AE-4E edger. The mill also is equipped with a Woodmaster W-4000 four-edge planer.
Johnson enlisted in the Marine Corps out of high school and served five years, learning metal smithing and other hands-on jobs, including carpentry, wood working, and plumbing. He moved back to Washington after his military service and worked at Westport Shipyard, which uses composite materials to build yachts and other commercial vessels. Johnson was a police officer for 12 years prior to taking the job as the mill manager.
“This just popped up unexpectedly,” said Johnson, “and I thought I’d just apply for it and see what happens, and I ended up getting it,” he said. Although he had no previous sawmill experience, his metalsmithing, carpentry, and plumbing skills have all proved very valuable in his current position.
The mill sells lumber and residuals to local customers. Lumber is used to build sheds and similar structures; residuals are used for firewood and smoke houses.
The tribe has other plans for residuals, too. “We are currently looking at some pellet machines,” said Johnson. “We want to start making our own pellets and/or compressed board for locals or whoever wants to purchase these products.” Establishing a pellet mill may also involve adding equipment to grind and dry residuals.
Johnson also is looking into adding firewood production equipment and a kiln to dry firewood. “These projects would allow us to recycle our scrap and create new products,” he said.
Other expansion plans under consideration include increasing storage space for dry lumber.Johnson is weighing additional structures, such as another SteelMaster quonset building.
The Makah mill now has a Crown Royal wood-fired boiler that was expected to be operational in the near future. The mill’s wood waste will be used to fire the boiler. Plumbing was being installed so the boiler can supply hot water to heat the buildings and perhaps the kilns.
Johnson, whose mother is also a member of the Makah tribe, serves on the tribal hunting committee and is a member of the American Legion. He enjoys elk hunting, wood working, and tinkering with and fixing things.
Johnson is focused on growing the mill’s business, adding more jobs, and hiring more employees to support the community.
The Makah mill is a beacon for the area, he said. “I would say what makes us unique is we’re harvesting our own timber on our own land, and then our own community members working the mill and doing it, so it’s almost 100 percent within our community.”

The TimberKing 2520 is an industrial model, powered by a Kubota 65 hp diesel engine.














0 Comments