Tigercat’s New Triangulated Harvesting Head

by | Mar 27, 2024 | Industry News, Supplier Newsline

Tigercat adds fifth model to harvesting head line-up with the new three-wheel drive 573.

In late September 2023, visitors to the PLC live demo event held in Washington state got a sneak peak of the new Tigercat 573 harvesting head processing logs on the end of a Tigercat 875E logger. Since then, multiple units have been testing in far flung regions from Alberta to Australia and the results are in. The 573 is shaping up to be a high performing, reliable head for roadside processing and harvesting.
Best suited to medium and large tree profiles, the 573 has a 800 mm (31 in) maximum cut capacity and offers optimal performance in 400-600 mm (16-24 in) diameter timber. The feed rollers close down to 60 mm (2.4 in), allowing the 573 to smoothly delimb and process smaller diameter trees and thus achieve higher value fibre recovery.

The compact frame design deftly handles poor stem form and contributes to tidy delimbing performance. The triangulated feed wheel arm configuration operates in locked three-wheel drive. This, combined with timed knife arms, provide the operator with fast picking and positive stem control for high productivity in roadside processing applications. Independently mounted, trailing-arm length measuring ensures reliable tracking and accuracy.

The top knife and lower/back knife pivot on the same side of the chassis frame, aligning the position and flow of each stem centrally through the head. This arrangement promotes positive contact with all three feed rollers and the measuring wheel at all times. The result is better quality and accuracy, reduced fuel consumption, and greater processing speed. The orientation also provides the operator with a clear sightline to the measuring wheel.

The 573 is standard equipped with continuous rotation for ease of use and superior hose routing and protection. Quick, stable WiFi connectivity between the cab and attachment modules reduces wire routing along the boom and provides excellent command response.

The Tigercat D7 control system is available with Priority or Optimization levels and is fully compatible and compliant with StanForD Classic and 2010.

The 573 is a great fit for the H250D, 850 and 875E for roadside processing applications and the H822E and H855E carriers for in-stand harvesting.

Forestnet

Author

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Gem Chain Bar Focused on Innovation

Gem Chain Bar Focused on Innovation

Gem Chain Bar supplies global customers with harvester bars, replacement tips, sprockets, chain, and chain loops. The company is based in Grangeville, which is located in the lower half of the Idaho panhandle, just below the southeast corner of the Nez Perce Reservation. Gem Chain Bar employs 30 people working in two buildings with about 10,000 square feet under roof. Annual sales are in the range of multi-millions.

Tech Review: Firewood Processors

Tech Review: Firewood Processors

Timberwolf Firewood Processing Equipment, Blacks Creek Innovations Inc, BruteForce, DYNA Products, Halverson Wood Products, Multitek, Eastonmade, Tajfun USA, Cord King, Valley Forestry Equipment, Range Road, Wallenstein