HewSaw’s patented dx sawing technology has brought benefits to sawmillers

by | Dec 18, 2023 | Industry News, New Technology, Sawmill, Supplier Newsline

Hewsaw

It’s been 10 years since HewSaw started developing and testing what the company describes as ground-breaking sawing technology, dx sawing, which provides sawmills with the opportunity to process cants at a faster speed and with thinner kerf saws. This results in increased throughput, higher recovery and improved efficiency, says HewSaw.

HewSaw’s optional dx sawing system can replace the company’s standard double arbor sawing technique with a four-arbor system. The first set of arbors will house the saws for an initial or pre-saw cut into the cant, while the second set of saws finishes the job.

On a sawline equipped with dx sawing, the log is presented in the usual way to the HewSaw scanning conveyor. After the log is scanned, it is then positioned for the HewSaw with the company’s highly accurate rotary log positioner, followed by four-sided chipping to produce the cant. This is the point where dx sawing comes into the process. In a standard HewSaw line, saws on a single set of double arbors remove the sideboards from the left and right side of the cant, but with dx sawing this first set of saws only pre-cuts the sideboards. Then just downstream, a second set of saws finishes the job.

As with HewSaw’s standard sawlines, edging tools complete the process, meaning the boards do not require any downstream edging. Once the cant reaches the ripsaw, a HewSaw line equipped with dx sawing will repeat the process for sawing the centre stack—the first set of saws makes the pilot or pre-cut while the second set of saws completes the cut. As with the cant saw, edging tools following the ripsaw further process the outer boards.

www.hewsaw.com

Forestnet

Author

0 Comments

Tigercat’s New Triangulated Harvesting Head

Tigercat’s New Triangulated Harvesting Head

Tigercat adds fifth model to harvesting head line-up with the new three-wheel drive 573. In late September 2023, visitors to the PLC live demo event held in Washington state got a sneak peak of the new Tigercat 573 harvesting head processing logs on the end of a...

Nors Group acquires Canadian Great West Equipment

Nors Group acquires Canadian Great West Equipment

Nors Group acquires Canadian Great West Equipment for 150 M Vancouver, Canada and Porto, Portugal – March 1, 2024: Nors Group has come to an agreement to acquire Great West Equipment for around 150 million Canadian dollars (around 100 million euros), a major dealer of...

Wood heating:
for a sustainable future

PELLET | WOOD LOG | WOOD CHIP BOILERS

Best choice –
Available now!