Blow down creates business opportunity

by | Dec 18, 2024 | 2024, Forestnet Magazine/Logging & Sawmilling Journal, November/December 2024, Sawmill

When nearly 160,000 cubic metres of salvage wood from a blow down of mostly Eastern White Cedar in northwestern Ontario pretty much dropped into his lap, Stefan Szeder smelled more than just the sweet aroma of this attractive moisture-resistant wood species. He also smelled opportunity.

Now, having spent over two years preparing, he’s eagerly looking for customers for his variety of cedar and Eastern White and Red Pine wood products to fulfill his dream. He wants to become a one-stop cedar shop to customers in northwestern Ontario and beyond.

It was a combination of fortuitous events and circumstances that led Szeder, owner of Szeder Sunset Cedar in Barwick, Ontario, to the point where he is today. First, no forest company wanted to salvage the timber from this massive blow down located west of Fort Frances. Second was the availability of 4.5 hectares of land and an abandoned building in the town of Barwick, 45 kilometres west of Fort Frances, where peat moss was formerly bagged and sold. He was able to purchase the land and building at a discount through a tax sale. Surprisingly, it included a working mechanical bagging system and three-phase power was close by. Third was Szeder’s family sawmilling history, specifically producing cedar wood products.

Back in the early 1980’s, they supplied products like cedar lath—manufactured on a saw line set up on the family farm—that was used as the building material for structures to shade ginseng crops, across the border in Wisconsin. Ginseng needs shade to propagate. They then purchased a Morbark PS8 post peeler and expanded into cedar posts and rails and later into cedar shingles.

But as a small enterprise, a new softwood lumber agreement between Canada and the U.S. proved too challenging for them with all the paperwork involved. So the business started by Szeder’s father was retired in 1992 and he went to work in the construction industry. However, several critical pieces of the sawmill remained intact on the farm.


The Cantek 230-5 moulder (above) is where Szeder Sunset Cedar hopes to make a lot of their profit from high end products like tongue and groove Eastern White Cedar lumber. The business salvages as many 1” boards as possible from logs with centre rot. With better logs, they can produce up to seven 1” boards from larger cants per cut on their resaw unit (below).

Fast forward 30 years and with a significant amount of salvage wood from a blow down that occurred in 2021 becoming available to him, Szeder decided to jump back full time into the wood product manufacturing business.

“It actually opened up a massive
opportunity for us and we’re working to capitalize on that now,” Szeder says. “Because of cedar’s natural moisture resistance, there are years of material that we can access there.”

One of his biggest supporters is Ian Armstrong, General Manager of the Boundary Waters Forest Management Corporation (BWFMC). A fairly new entity, having been established only about five years ago, it is responsible for forest management within a large geographic area surrounding Fort Frances along the American border. Its membership includes several major forest companies operating in the area such as West Fraser Timber and Resolute Forest Products.

Szeder says that BWFMC made the blow down material available to him after its members passed on it, given what a tangled mess it was on challenging terrain, and the fact that it was mainly cedar. Most of its members are softwood lumber producers.

In addition to this salvage wood, BWFMC has also signed a fibre supply agreement with Szeder Sunset Cedar for another 7,500 cubic metres of cedar annually.

Armstrong says that their forest management area is split between the Boreal Forest and the Great Lakes/St. Lawrence Forest. While it has abundant merchantable conifer species, it also contains significant quantities of Eastern White Cedar, particularly in that area around Fort Frances. No one was harvesting it before Szeder showed an interest, and then there was the matter of salvaging that blow down timber.
Given the closure of the large Abitibi Resolute pulp mill in Fort Frances about five years ago and the jobs lost as a result, the BWFMC is pleased to support any organization that wants to bring back some forestry jobs to the area, even if it is only a few at a time. Szeder’s knowledge of Eastern White Cedar, its abundance, and severe under-utilization strongly encouraged BWFMC to want to support Szeder’s business plan.

“Basically, no one was using the cedar at all, so it was perfect for a facility to be set up in the area,” Armstrong says. “It’s some sign of growth. It’s a new mill in the area and even if Stefan employs just five or six people, it’s a step in a positive direction in an area that has been under so much doom and gloom since that huge pulp mill closed.”

One of the benefits of cedar is its moisture resistance so smaller logs make great fence posts. Szeder Sunset Cedar uses a Morbark PS8 post peeler (above) to produce a variety of posts and railing. Company owner Stefan Szeder built his business plan around finding markets for his waste products like cedar shavings before thinking about a solid wood line.

The doors on Szeder Sunset Cedar opened in 2023 after two years of filing paperwork with the Ontario Ministry of Natural Resources for a timber supply agreement, cleaning out the old peat moss building, installing the electrical wiring, and setting up a production line. The company is still working to find its footing, searching to see where the market will direct them, but it has the essential wood fibre supply, sawmilling experience, and production line in place.

Given his past experience and knowledge of the characteristics of Eastern White Cedar, Szeder had a good understanding of the quality of the local resource. Unlike Western Red Cedar, which, as its name implies, tends to have a shade of red, Eastern White Cedar has a yellowish tinge with small solid knots. It also tends to be structurally stronger because it grows slower with very tight growth rings, making it a good and long lasting building material for cedar shakes and shingles.

But Szeder was also aware that the area’s cedar suffers from centre rot, primarily due to its age. So a significant portion of his salvage wood was destined for cedar shavings, too, right from the start, although they also plan to produce some pine shavings from the small pine component they intend to salvage from the blow down. Szeder says some of their pine logs measure 30” in diameter. Their merchantable wood basket is about 90 per cent cedar and the rest White and Red Pine.

Given the quality of the local cedar resource, he says that he took a unique approach to building his business, which involved ensuring that he had a home for his waste products like shavings and bark before concentrating on solid wood products. To accomplish that, Szeder has purchased a modern, purpose-built, Jackson Wood Shaving machine from the Jackson Lumber Harvesting Company in Wisconsin, which quickly produces shavings similar to those coming off a planer mill.

Over the past two years, he has learned some important lessons about cedar shavings, moisture content, and plastic bags, making him realize that he needs to lower the moisture content on his shavings to at least 10 per cent. Also, unlike pine shavings, he has discovered that cedar shavings are not conducive for use as bedding for many animals besides small pets, like hamsters. However, given cedar’s naturally attractive aroma, Szeder Sunset Cedar is investigating its use in small bags to improve air quality in confined spaces like closets.

Marketing cedar bark also has potential.

“Our local research has shown that there is a market for cedar bark mulch for around flower gardens and trees,” says Szeder. “We are actually using that byproduct and generating retail sales from it.”

Marketing his waste products is only one part of his business plan. Szeder has moved his circular sawmill, lath mill, shingle mill, Morbark post peeler, and wood moulder from the farm to the old peat moss building. So they are able to produce a variety of solid wood products from fence posts and railings, to attractive tongue and groove paneling to square timbers. They offer four sizes of fence posts as well as railing. Finally, they also offer custom sawmilling services.

With cedar logs containing centre rot, the company salvages as many 1” boards as they can, using the circular saw, before sending the rest to the shavings unit. With the better quality logs, they manufacture 4” to 6” cants measuring 8’ long on their circular saw, air dry them for about two weeks, process them through a resaw unit recovering up to seven boards from each larger cant, air dry them again, and then process the boards through a five-head, Cantek 230-5 moulder. The knives on the moulder give them the capability to produce a variety of wood products from straight lumber to tongue and groove to side paneling. They also keep some live edge material in stock.

In addition to needing to redefine his cedar shavings market and reducing its moisture content, Szeder says that he also has to contend at the present time with a soft market for appearance grade cedar products as a result of higher interest rates. Once interest rates began squeezing homeowners and home builders, the market for high end, appearance grade cedar took a downturn, coupled with what Szeder says is an unexplained sudden availability of cheap Western Red Cedar in Central Canada. Retailers have become reluctant to stock larger quantities of high end cedar, given the current financial squeeze on customers because of the economy. On the positive side, the federal government is investing a lot of money to encourage home building, but it remains to be seen how much high end wood finishes home builders will include in their designs.

Down the road, Szeder is thinking seriously about setting up a cedar shingle manufacturing operation again because he says the demand exists for higher end homes, and they have the capability to manufacture them. However, there is a lot of manual labor still required for this endeavor, and organizing that will
take time.

Tony Kryzanowski

Author

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Managing Vegetation in B.C. Plantations – With Sheep

Managing Vegetation in B.C. Plantations – With Sheep

Dennis Loxton built a career pioneering the use of sheep in vegetation management in the B.C. silviculture sector, and remains confident sheep farming has a future—including the use of sheep to graze plantations.

Junction Lumber Takes Another Turn for Growth

Junction Lumber Takes Another Turn for Growth

Junction Lumber Products has a history of adding to its mill facilities—and now has plans to move its growing pallet manufacturing facilities off site, to increase its efficiency.

Setting a New Bar for Thinning

Setting a New Bar for Thinning

Two very inventive New Brunswick cousins on the east coast have developed a new hot saw excavator attachment—the Timber Claw—which they believe will set a new bar for mechanized pre-commercial thinning.