May June, 2003





New Products

New HogZilla Addition
CW Manufacturing, Inc. has introduced a new monster — the HogZilla HTC-1464T track-mounted tub grinder. By engineering the power train and aggressive hammermill of its largest TC Series grinders into a track-mounted chassis, maximum production from an easily transportable Track Mounted Monster Tub Grinder is achieved. A 1000 HP Cat engine powers the huge hammermill while providing the efficiency and multiplied torque from the torque converter mill drive system. The hydrostatic tracks reduce the amount of support equipment and manpower required to move the grinder, while offering the convenience of wireless remote control navigation through difficult job site conditions. For more information call (800) 743-3491 or log onto their website at

Stellar Adds Reach to Telescopic Crane
Stellar Industries has increased the reach of its 10,000- pound capacity telescopic service crane to 28 feet. The 10628 crane is designed to meet the needs of heavy construction companies and equipment repair shops. The 10628 has a 55,000-foot/pound capacity and can lift a maximum of 10,000 lbs. at 5’6" and 1,095 lbs. at 28’4". It uses a planetary winch system with a hydraulic/mechanical brake system and has a 60 foot/minute winch speed. For more information, contact Stellar at (800) 321-3741 or e-mail them at

Bull Hog® Attachment
Fecon’s Bull Hog® BH40 wood grinding attachment was developed to reduce weight to accommodate smaller or long-reach excavators. Rated for 65-100 HP, it can process trees of 6"- 8" in diameter. The Bull Hog® increases utilization for excavator owners, making services more versatile. Fecon has also come out with the Severe-Duty Bull Hog® 250H attachment, developed for rubber tire and track machines used in land clearing, site prep, fuel and slash reduction, forest and pasture restoration and processing municipal brush waste. Weighing 7,200 lbs. and rated for 180-500 HP with a working width of 88", the BH250 can process trees in excess of 15" in diameter, creating endless opportunities by reducing brush and wood quickly, safely and inexpensively. For more information call (800) 528-3113, e-mail  or visit

Kenworth Offers New High-Speed Transmission on HeavyDuty Truck Models
Kenworth Truck Company now offers the Eaton Fuller Lightning 10-speed manual transmission for its T600, T800, W900, T2000, and C500 models. The transmission is rated at 1,550 and 1,650 lb. ft. of torque, is lighter than Eaton Fuller's previous Super-10 transmission and has fewer parts for easier servicing. The transmission features an aluminum clutch housing, electric splitter button control knob, and selectable Top-2 automated shifting between the top two gears. The Lightning 10-speed transmission can be spec'd with Caterpillar C-10, C-12 and C-15 and the Cummins ISX (rated at 500 horsepower or less). The transmission is approved for gross vehicle weight up to 80,000 pounds. For additional information visit

BluDot Anti-Lock Braking
BluDot Inc., together with MasterBrake System, have announced a breakthrough in the actuation and control of hydraulic braking systems for commercial vehicles. The ElecDraulic I™ and The ElecDraulic II™ braking systems feature a microprocessor-controlled system, integrated self diagnostics and a choice of hydraulic and disk brakes. They also offer optional load proportional braking and anti-lock braking to eliminate flat spotting of tires caused by brake lockup. The braking systems can be mounted on new and existing trailers. The ElecDraulic I™ system is available for 650, 800, 1000, 1200 and 1600 psi systems. It can support single axles up to 3,500 pounds and triple axles up to 15,000 pounds. For higher capacity applications, the ElecDraulic II™ has 5.60 cubic inches of fluid displacement. For more information call (574) 277-2306 or visit the company’s website at

Morbark Offers New Shredder
Morbark, Inc. now offers a slow speed, high torque, primary waste reduction shredder. The Morbark Predator is designed to process difficult materials such as C&D debris, railroad ties and other contaminated waste streams that are unsuitable for high speed grinding. A64" by 76" shredder opening feeds material in 15" diameter counter-meshing rotors with hooked start shredders mounted to the rotor in a spiral pattern. Shredder assemblies are of welded construction and are hydraulically driven off the engine through two 99:1 reducing transmissions delivering 950,000 inch/pounds of torque to each rotor. The 44,000-pound Predator is equipped with a 48" wide continuous belt discharge conveyor with a discharge height of 138". For more information call (800) 233-6065 or e-mail Morbark at


   This service is temporarily unavailable



This page was last updated on Tuesday, September 28, 2004