Titlebar_sm.gif (41227 bytes)
Main Page

Features

Index Page
Spotlight
Contractor Profile
OSB Operations
Harvesting
Mill Upgrade
Sawmilling
Elmia Wood 2001

Fibre Processing

--------------------
Departments

Supplier Newsline  
TechUpdate

Calendar of Events  
Column: Industry Watch

Reader Request Form


---------------------
Site Information


Contact List
Subscription Info
Past Issues Archive
Join our Listserve
----------------------

 

OSB Operations

Faster & Flexible

Weyerhaeuser's new OSB mill in Saskatchewan is faster, flexible and has the ability to upgrade to produce oriented strand lumber. 

By John Dietz

Weyerhaeuser Canada's newest mill, called OSB 2000, has the promise of quickly becoming an industry leader on several fronts, according to Weyerhaeuser Wood Products division officials. The $200-million mill, officially opened in late June, is one of three Weyerhaeuser facilities in the community of Hudson Bay, Saskatchewan and, as befits a new OSB operation, is big-it has 10.6 acres (460,000 square feet) under one roof. Its work force includes 165 people involved in production, trades and management. Sod was turned for the mill in mid-1999, shortly before Weyerhaeuser took over forestry giant MacMillan Bloedel, which had holdings in Saskatchewan. 

The rated line speed at Hudson Bay is 146 feet a minute on 3/8" sheathing. The line does a double off-load of boards from the press, allowing the press to achieve a quicker cycle time and the faster line speed.

It occupies the former Simpson Timber stud mill site about two kilometres south of the community. Operations began in November, 2000. The new mill can produce roof and wall sheathing ranging from 1/4-inch to 1-5/8th inch thickness and from 3x6 feet to 9x24 feet. It has the capacity to produce tongueand- groove sanded flooring and can be upgraded to produce oriented strand lumber. The mill can turn out some 600 million square feet of 3/8th-inch paneling annually. Weyerhaeuser is also attempting a high level of co-operation and collaboration between employer and employee at the new Hudson Bay operation. 

The area has many families that are second and third generation workers in the logging industry. "The union, IWACanada, played a pivotal role by supporting this project initially and by entering into a Commitment Agreement with Weyerhaeuser that has created a genuine, productive partnership," says Bob Batt, unit general manager for Hudson Bay operations.

Hudson Bay Teams Tweak Work System 

New challenges mean new labour/management approaches 

Since Weyerhaeuser's OSB 2000 mill has unique new processes and procedures, management and IWA Canada have worked together to help employees face the new challenges. "We came together to craft new work systems and collective agreements that would benefit all the employees and reward their efforts," says Bob Batt, unit general manager for Hudson Bay operations. The new system supports and encourages voluntary certification by employees, leading to higher performance throughout the mill. 

It is intended to do everything possible to provide world class leadership in safety, productivity, profitability, compensation and employment security. It also provides incentives to get involved, enhance skills and work together, explains Batt. The mill now operates with a set of six functional teams: yard, log process, finishing, process control, heat energy and maintenance. "We've designed the teams to operate effectively with overlapping job functions within and between teams," says Batt. "Team members rotate responsibilities within their teams, gaining broad-based skills and experience. As members learn skills and master new procedures, they benefit with a skill/knowledge based pay progression in the collective agreement."

 

The plant relies on a combination of proven and new technology. "Our rated line speed is 146 feet a minute, or 742 mm/sec, on 3/8" sheathing," says Batt. "I believe that's the fastest line speed in the industry. We are able to achieve that with the latest version of the Siempelkamp forming and press line. In fact, we've achieved that speed on 7/16-inch sheathing." The new line does a double off-load of boards from the press, allowing the press to achieve a quicker cycle time and a faster line speed. OSB 2000 is the first mill with this line to use this ability. The forming line also is able to orient the board in two directions, an industry first, according to Batt. "We have a rail system and carriages that enable us to interchange the four strand orienters," he says. "We can take the core orienters and place them where the surface orienters normally would be. It works very well and we can make the change in two hours." 

Strand orientation is significant for some customer requirements and has received strong support in the market already. Two additional surface orienters can be on stand-by in a bay. They could replace the core orienters in the line and enable OSB 2000 to produce the first oriented strand lumber (OSL), with all strands oriented in one direction. To accommodate OSL, the press platens open to 14 inches instead of the standard 11 inches. A pre-press further boosts the thickness capacity, by an initial pressing on the very thick mat that would be required for OSL. The press is also able to apply steam injection for rapid curing of the resin in mat that will be 1 5/8th-inch thick when pressed. 

Only one other Weyerhaeuser OSB mill has this steam injection capability. Flexibility is designed into the OSB 2000 system so that, with the exception of the forming line and press, routine maintenance can be done at most points without stopping the flow of production. The mill design was handled by CPM Consultants of Vancouver, BC, which has designed many other OSB mills for the industry. "The mill is designed very well," says Batt. For instance, stored logs are forwarded to one of six conditioning ponds that feed three lines. (The ponds, about 200 feet long, are heated by thermal oil radiant heaters.) Each line has a debarker and strander. When any single line needs to be shut down, the stream of wood can be directed around it.

Ready for the strander infeed, a 36 inch pocket of logs is securely clamped down (below). The four carriages (left) are beside a rail system. In just a few minutes, a carriage can be moved out and exchanged with another carriage, changing the orientation of the board.

The system has two live-bottom green strand storage bins that each hold 15,000 cubic feet. Conveyors carrying green strands from the three stranders can be directed to either of the green bins. Strands are metered in parallel streams into the dryer-cyclone-blender system. Each dryer feeds two cyclones. Acceptable material from the cyclones, after screening, is fed to one of four 10,000 cubic foot dry strand live-bottom bins. Both types of bins are manufactured by Raute Wood. In the four Coil blenders, the strands are mixed with resin and wax. Two blenders are dedicated to surface resin and two to core resin. 

Each blender is 11 feet in diameter by 35 feet long, now standard for new mills. Beyond the press, flexibility continues. Panels can be hot stacked or continue on to be processed to finished dimensions. Trimmed panels can go into the primary grade bin stackers or onto a specialty product line. The facility has four grade stackers available. Finally, bundled sheets are transferred to one of two paint booths where edge seal and the Weyerhaeuser stencil is applied. "Many mills have only one paint line," says Batt. "If that line has a problem, it shuts down the whole mill. With two (lines), we have flexibility." Weyerhaeuser now has six whollyowned mills in four Saskatchewan communities, says Steve Smith, vice-president, Saskatchewan. 

Smith chairs a management council of the mill managers, manufacturing managers and support services leaders. As well, Weyerhaeuser has 51 per cent ownership in a joint venture sawmill with three First Nations bands, Wapawekka Lumber, at Prince Albert. "OSB 2000 joins the existing OSB 1000 facility within Hudson Bay," says Smith. "That plant was the first waferboard plant in North America, built in the early 1960s." It has 65 to 70 employees and produces 1/4-inch OSB. 

The third Weyerhaeuser facility at Hudson Bay is a softwood plywood plant which employs 144 people. All three mills at Hudson Bay, plus a Carrot River sawmill, were part of the 1999 acquisition of MacMillan Bloedel. "This new OSB plant makes us a very integrated forest products manufacturer in Saskatchewan," says Smith. "We have two forest management licences for the province and from a raw material standpoint we operate those two as if they were a single supply basket for all seven mills. We can pretty much make use of every tree on every hectare on the FMAs." 

Across the harvesting operations, plywood peelers are collected for the plywood plant at Hudson Bay. Small logs are segregated for the Wapawekka sawmill that is specially equipped with small log technology. The company also has large and small log lines at a mill in Big River and produces studs at the Carrot River mill. Raw material for OSB 2000 will flow from private land, primarily in the Hudson Bay area, as well as forest management areas. Up to 20 per cent of the material may be purchased privately. 

"There's a lot of farm land in this region with aspen growth and farmers are quite interested in selling wood to us," says Smith. "As well, the Saskatchewan Environment and Resource Management department is interested in agro-forestry and the forestation of some marginal lands. We certainly see this happening in the future." Weyerhaeuser acquired its initial holdings in Saskatchewan in 1986 with the purchase of the Prince Albert Pulp Mill and Big River sawmill. In the past 15 years, it has invested approximately $1 billion in Saskatchewan's forest industry. "We believe Saskatchewan is a good place to do business and has a good forest resource along with relative political stability," says Smith. "Our total work force here now is about 1,500 people, not counting the Wapawekka joint venture, with an annual payroll close to $150 million."

Hudson Bay OSB Goes Big 

Large scale and high technology could be viewed as the guiding principles for the new Weyerhaeuser OSB mill at Hudson Bay, Saskatchewan. The Siemplekamp press assembly weighs in at a massive 3.3 million pounds. It has 16 openings with nominal sizes of 9x24 feet. It operates at 215 C and applies 750 psi. Each press frame is a single unit weighing about 1,114 tons. Other technology includes: o Six-inch strands are produced by the four CAE Model 37/118 disc stranders. "There may be one or two other mills close to this length, but I believe this is the longest strand used in the industry right now," says Bob Batt, unit general manager for Hudson Bay operations. "It enables us to achieve superior strand orientation and thereby improve the board properties."  Canada's first revised Nicholson A5B debarkers, which were introduced in 2000. 

The new version is "a little more rugged and a little easier to maintain" than its predecessors which have been produced and used for many years. o An improved version of the TSI-designed, Weyerhaeuser-built strand dryers are also at work. The 80-foot dryers, 20 feet in diameter, have exceeded their rated capacity of 45,000 oven-dry pounds per hour. o At the jackladder outfeed, the mill uses a roll case, rather than chains, to forward logs to debarkers. "The roll cases are very rugged and do a better job of letting bark and mud drop out before reaching the debarkers," says Batt. "They're also very aggressive in moving the logs." o Marietta, Georgia manufacturer GTS has produced one of its largest energy systems for the new Hudson Bay mill. Total energy output is 260 million BTUs per hour, burning 50,000 pounds of bark and other wet fuel, plus a little more than 5,000 pounds of dry fuel. The thermal oil heating system supplies heat for the outdoor ponds, 11-acre mill, plus the press and dryers. The mill uses two GTS heating cells, which are sized to also accommodate a third dryer.

Email this page to a friend

 


This page and all contents 1996-2007 Logging and Sawmilling Journal (L&S J) and TimberWest Journal.
For personal or non-commercial use only.
This site produced and maintained by: Lognet.net Inc
Any questions or comments on this site can be directed to Rob Stanhope, Principal (L&S J).
Site Address: http://www.forestnet.com.

This page last modified on Tuesday, February 17, 2004