Logging and Sawmilling Journal October/November 2011

August/September 2013

On the Cover:
Managing mobile equipment effectively is a key part of an efficient sawmill. B.C.’s S & R Sawmills is finding that investing in new Cat wheel loaders from Caterpillar equipment dealer Finning is paying off in reduced fuel costs. See the October issue of Logging and Sawmilling Journal for a full report on the new wheel loaders at
S & R (Photo of S & R Sawmills millyard by Paul MacDonald).

Home-grown wood pellets for NWT?
The Northwest Territories sees a business opportunity for home-grown wood pellet production with the growing use of wood pellet heating, supported by a strategy to reduce greenhouse gases.

L & M Lumber: a tradition of innovation
A mill upgrade at B.C.’s L & M Lumber—involving a new optimized log breakdown and processing line—positions the independent producer well for recovering lumber markets, and continues a tradition of innovation and improvement.

Tackling tough B.C. roadbuilding
Mark Ponting and his construction crews tackle building logging road in some of the toughest ground in the country, on the B.C. Coast, and they rely on their equipment dealers to help out in minimizing equipment downtime when they are “miles from nowhere”.

Mistik manages growing wood demand
Saskatchewan’s Mistik Management is adapting to the growing timber needs of the NorSask Forest Products mill, which is adding a shift, and is going to require twice as much wood—but it’s a challenge they’re very happy to have.

How does your kiln system stack up?
With mill management always on the lookout to improve their drying operations, it was no surprise that a recent kiln drying seminar in Quebec City drew good attendance, and lively conversations.

OSB on the way up
The market for Oriented Strand Board has improved with the recovery of the U.S. housing market, and Ainsworth Lumber—which is in the process of being purchased by forestry giant Louisiana-Pacific Corp.— is looking at ramping up its OSB operations to meet the increased demand.

Bring on the wood ...
The Miramichi Lumber sawmill in New Brunswick has recently completed an upgrade, including an entirely new small log saw line, and is now raring to go to meet recovering lumber markets.

Turning biomass power on,
diesel off
A wood biomass-fired power system in the works in the small village of Kwadacha, B.C. could be a model for other remote communities looking to wean off costly diesel and propane for power production.

Rolling with the changes
Logger Clint Lightburn is rolling with the changes as forest company Canfor is asking its contractors in southeastern B.C. to move from delivering tree length wood to cut-to-length to its upgraded mill facility at Elko.

The Edge
Included in The Edge, Canada’s leading publication on research in the forest industry, are stories from the Canadian Wood Fibre Centre, Alberta Innovates - Bio Solutions and Alberta Agriculture and Rural Development.

Tech Update – Mill Wide Information Systems
LSJ looks at the technology and systems available to help mill management better manage and operate mills.

The Last Word
Jim Stirling takes a look at the debate surrounding the creation of more area based forest licences in British Columbia.

Suppliernewsline